MEP SHOP DRAWINGS
BPS can provide detailed drawings of air duct installation and assembly. The modeling of the air terminals and equipment should be a digital twin of the one to be installed. The contractor should provide their standards for duct cutting and special parts to be used in the BIM model.
HVAC SHOP DRAWINGS
BPS can provide shop drawings for ductwork contractors with the level of detail and information required for an accurate work in the field. To achieve this the HVAC BIM model will need to be developed at a higher level specially for the air terminals (diffusers, registers) and for the mechanical equipment (air handling units, fans). And the contractor will need to provide us with its own fabrication standards.
PLUMBING SHOP DRAWINGS
BPS is able to provide detailed drawings and assembly of plumbing fixtures. The contractor must provide their standards for pipe cutting and special parts to be used as well as the technical data sheets of the sanitary equipment to be installed so that the BIM model will produce accurate drawings and documentation.
FIRE PROTECTION SHOP DRAWINGS
BPS is capable of providing fire system installation drawings. The contractor must provide their piping type and joint standards, sprinkler heads and technical data sheets for valves and pumps to be installed in order for the BIM model to produce accurate drawings and documentation.
ELECTRICAL & LIGHTING SHOP DRAWINGS
BPS is capable of providing detailed electrical and lighting installation drawings. The contractor must provide datasheets for lighting equipment and special electrical supply equipment in order for the BIM model to produce accurate drawings and documentation.
DIGITAL FABRICATION
BPS is capable of generating BIM models from which digital information can be used for component manufacturing.
SHEET METAL FAB
BPS can provide detailed exploded views of pipe assemblies. Joints and special parts must be digital twins of the actual parts so that pipe cuts are accurate. Thorough labeling of parts is critical to the logistics and sequencing of on-site piping assembly.
SPOOLS FOR PIPING SYSTEMS
BPS can provide pipe spools for a piping system with all its components and listed for fabrication. Fittings, valves and all components need to be modeled at a high level of definition and information to produce accurate assembly layout plans and spools.